Western Log Home Supply Posting Page
Thursday, March 19, 2009
Log Jam is the only chinking to hold a 1 hour UL fire rating when applied in accordance with the Fire Resistance Directory Design No. UL519. What does this mean and why is it important?
What is UL?
UL stands for "Underwriters Laboratory".
Why was a certification needed?
The rebirth of the log industry in North America could be described in a number of terms. “Easy” would not be one of them.
Log home companies and their product suppliers have constantly faced resistance from:
The fledgling industry has often found itself in the frustrating position of being condemned not by facts but by biases.
The experts felt that since many of the compounds used to make water-based chinking decompose at temperature far below the 1700 degrees required by the test, a chinked log wall could not survive it.
This belief persisted in spite of the fact that a one-hour fire test had never been attempted on any log wall system, chinked or otherwise.
The end result of this widely shared view was that many log projects were held up or stopped completely since most major building codes required a one-hour fire rating in critical areas such as between the garage and house or in commercial structures.
Often, log home customers were told that their log partitions would have to be covered by drywall in the critical areas.
Certainly, this tended to dampen enthusiasms for solid timber walls.
Now, a test conducted by Underwriters Laboratories has laid this belief to rest. Recently, it tested a complete chinked wall system which passed the one-hour fire test. The chinking compound under scrutiny was Sashco Sealants Log Jam Chinking compound.
It cost Sashco, a Colorado-based company, about $10,000 and months of research and testing to perfect the formula for Log Jam Chinking. But the company believed an answer had to be found to the problem.
According to company officials Sashco began with a pragmatic “back yard” approach. A miniature log wall section was constructed out of 4” fence posts. In a crude simulation of the one-hour test, they exposed the section directly to flame from a propane torch for one hour.
Researchers quickly discovered that they could not prevent decomposition of the chinking material. So, instead, they found a way to make the decomposition work in their favor. They reasoned that if they could not get the chinking to stay put and not melt away, the burned exterior might act as an insulator in much the same way as the charred surface of wood provides a thin barrier between the flames and the material behind it.
They arrived at a formula which actually formed small “heat shields” as it charred. It gave an unexpected bonus in that it also expanded as temperatures increased. This further protected the integrity of the log joint.
Funds were then made available for the Underwriters Laboratory test which essentially was to certify the results found by the Sashco researchers. Certification by UL meant that building inspection could be passed by log walls using Log Jam Chinking. Correspondingly, this would expand the availability of log structures for many commercial and residential applications where one-hour fire ratings were required.
The Underwriters Testing Procedure
The UL test involved the use of a giant furnace at the Underwriters Northbrook, Illinois laboratory.
In other words, the Log Jam Chinking had to be a good insulator as well as being fire resistant.
The investment Sashco made in time and money paid off. In July 1986 Sashco received the full UL test report. Not only did its Log Jam Chinking pass all aspects of the one-hour fire test, the unexposed side showed a rise in temperature of only 160 degrees F., qualifying it as an excellent insulator.
“Log Jam Chinking is now the only answer to a one-hour fire wall needed” said one Sashco official, “unless, of course, you’d like drywall over your logs”
Information Courtesy of Sashco Inc.
by: Western Log Home Supply
Copyright © 2008 Western Log Home Supply - All rights reserved